KT-60 Moisture meter

TLORTNER instrument About
KT-60 is KLORTNER using the microprocessor's needle-free water detector, density of 0.05 g / cm ³ scale change to 0.10 g / cm ³ of 1.25g/cm ³; thickness of 5 mm scale change to 60 mm from 10mm. The large LCD screen below shows the temperature of the timber and measuring the thickness and density setting large upper left of the LCD screen displays the current temperature ° C. If the battery is low, KT-60 L symbol will be displayed in the upper left corner of the LCD screen to remind users!
  KT-60 mode, you can choose the wood density, temperature and the wood thickness; KT-R mode, you can select a range of density, temperature and correction. The upper left corner of the screen displays the measurement mode and the current temperature ℃.
Simple to use and accurate measurement, which is TLORTNER Instrumentation
Second, the battery is installed:
Battery cover at the back of the instrument. Hold down the battery cover is pushed back, the battery cover slides out from the instrument, mounted on a 9V battery. Carefully slide the battery cover (Note chute). Your instrument is now ready for operation.
Third, the instrument operation
A) the power to open the instrument:
Determine the 9V battery loaded, press the ON button, the instrument vacant the moisture sensing display (KT-60 00.0) is displayed on the LCD screen thickness and temperature (corrected) and ambient temperature. Automatically shut down after 120 seconds after boot.
Tip If you press the ON button, the LCD screen is not displayed, press the ON button again, if still does not appear, check the battery. May not have installed the battery or the battery is low. KT series of instruments have an automatic shutdown function, automatic shutdown 120 seconds after boot. The screen is displayed in the upper left corner of the L, replace the battery.
B) set wood density (DST) & temperature (TMP) & thickness (THK) (correction (ADJ)):
    The KT Series Moisture instrument features wood density, temperature and thickness (corrected) eucalyptus button. The choice of the density in accordance with the timber air-dry density, temperature selection in accordance with the timber temperature condition, the thickness (corrected) in accordance with the thickness of the wood and your own needs.
    KT-60 induction-type moisture meter requirements for use on a flat, wood surface. The instrument on a plate, hold down the instrument can be slow-moving in any direction of the surface of the wood, real wood moisture immediately displayed on the LCD screen, measuring wood vacant.
    KT-80 dual function moisture meter, a changeover switch for the PIN / SCAN, the scan represented sensing measurement (KT-60), PIN-inserted needle measurement (KT-R).

Fourth, the technical parameters
Size: 120mm × 62 mm × 27 mm
Weight: 200g
Display: LCM color graphics LCD
Resolution: 0.5%
Measuring range:
1.0% -99.9% (KT-60)
1.0% -99.9% (KT-80)
6.0% -99.9% (KT-R)
Density range: 0.1-1.25 g / cm ³
Thickness range: 10 mm-60 mm
Temperature range: 0-70 ℃
Correction range: -5.0-5.0
Power supply: 9V battery
Housing: plastic (blue, black)