Company Profile:
Germany UV-Mess-undSystemtechnik (UV-DESIGN) is a technology with over 20 years history of professional UV ultraviolet test equipment manufacturer, is the German-made UV energy meter design and manufacturing source, more than 30 more than 150 models of UV ultraviolet test equipment marketing world, is the world's largest manufacturers of UV tester.

Product Description:
UV-int150 standard UV energy meter (also known as ultraviolet energy, UV energy meter, UV energy meter, energy meter UV, UV energy meter, UV energy tester, UV joulemeter), used to measure the UV energy exposure apparatus An apparatus measuring sensors in the measuring instrument main The back of the measurement range of 250 to 410 nm, the measurement can be directly displayed on the front of the UV energy meter readout on the display (Unit: mJ / cm), the power of the UV energy is 3.6 volt lithium battery, The battery is the use of a special line of energy saving, the battery lasts about 10,000 hours.

Product Overview:
UV-int150 standard UV energy meter is a high quality UV measuring instrument. Germany imported equipment. UV energy meter is used to measure the UV energy of UV curing device of an instrument, a main sensor measuring the back of the measuring instrument, measuring range 250 to 410 nm, the measurement can be directly displayed on the front display energy meter on: mj/cm2 (mJ / cm), the energy meter is powered by 3.6 volt lithium battery, which is the use of a special line of energy saving, the battery lasts about 10,000 hours.

Detailed parameters:
Range 0-5000mw/cm2
Showing 6 character numeric LCD :0-999999mj / cm2
Dimensions Diameter: 90mm High: 12mm
Weight about 150 grams
The maximum heating temperature of 70 ℃ (110 ℃ less than 10 seconds)
ON / OFF switch file
Power supply 3.6 volt lithium battery
Electric power 100pa can use 10,000 hours
Casing Aluminum / stainless steel
Spectral range 250-410 nm

Application:
UV energy meter for measuring the UV dryer (UV light curing), UV exposing energy equipment, such as the following materials and technology from UV: UV inks, UV coatings, UV glue, UV printing, PCB circuit board exposure, UV floor paint , UV coating ......
 
How to use:
1 Press the switch energy meter system "ON", the display will show "0."
(2) the energy meter turning on the conveyor belt. (Sensors are mounted to the rear of the instrument, can also withstand higher temperatures.)
3 Subject to the instrument through the conveyor belt, the result can be read from the front. UV energy will be displayed as mJ/cm2
4. Making a new measurement procedure, you must first turn off the instrument, then start again, the display will re-set to "0." You can then follow two. Continue.

Note:
1 Avoid shaking the instrument.
(2) Do not look or look through refraction / reflection UV lamp, ensuring anywhere on the body are not subject to UV irradiation.

Physical picture:

3. Installation / operation
a. ON switch, the LCD (display) is displayed as zero.
b. Irradiation time for an appropriate extension of the energy meter placed in a UV lamp near the light source, as far as possible its back alignment light source (due to the energy of the energy sensor in the back).
c. Measurement display on the display screen until the energy meter, for example, 1,000 mJ / cm ². (1000mj/cm2)
d. Turn off the energy meter switch (OFF), or set the value of the display to zero.