|
|
INTRODUCTION
NITTO SCALING & GRINDING pneumatic grinder
MYTON can correspond to a wide variety of special operations, the high power of the motor to achieve the grinding efficiency! ● cushion vibrations leverage. ● Replace the wheel spindle lock mode is very simple. ● absorb vibrations will not feel cold feeling using a resin handle. ● Slide the wrench mounted on the sides. ● regulator structure. Technical Specifications Model: MAG-50 Working pressure: 0.6 (6) MPa (kgf/cm2) Air consumption (no load): 0.87m3 / min No load number of turns: 12,000 min-1 (rpm) Wheel diameter: Ø125mm Hose Size: 1/4inch Body mass (weight): 2.2kg Standard accessories • Tracheal: 1 set • Exhaust pipe: 1 set • Side handle: 1 set • 6 Corner Bar Wrench 4mm: 1 个 • Wrench: 1 • Socket PT3 / 8 x NPT3 / 8: 1 个 |
|