KUHNAST UV-365A UV-LIGHT METER

New Germany imported UV-LIGHT METER KUHNAST ® UV-365A using microcomputer technology , is a high stability, high precision UV light strength tester , its volume , lightweight, easy to read large LCD display features beautiful , very suitable for the various sectors of the ultraviolet effective detection of the light source .

To achieve consistency UV curing effect , to accurately determine the time of replacement of the lamp , with only those who appear visually significant deviation, the optional UV light intensity detection device becomes even more important .

Applications:

Health, medical , chemical, electronics, aerospace and other industries , especially for industrial UV curing , UV disinfection , medical treatments , fluorescence analysis , ultraviolet lithography , water disinfection , UV irradiance measurements in areas such as biological breeding .

KUHNAST ® UV-365A to provide scientific and accurate test data , allowed a clear need for replacement of the UV lamp, the correct choice of power UV lamps provide guidelines for UV curing process has been optimized, and ultimately achieve cost savings purposes.

Main features:

Aluminum alloy shell, compact and flexible, you can one-hand operation ,

128 * 64 backlit LCD screen , beautiful and easy to read interface,

Separate the probe and the body design, easy to switch to a different spectrum of the probe ,

Automatic memory function, can be recycled to store 10 sets of data,

With lock function to facilitate the comparison of recorded work ,

Auto power off function to save power ,

Microcomputer technology, high accuracy, low power consumption

Linear UV detector , good stability , small visible affected by

Use of green rechargeable lithium-ion battery ,

Comes with a standard USB charging port can interface directly with a computer to charge USB,

According to the U.S. NIST calibration standard production volume biography .

Technical parameters:

Spectral range : UV 250-410 nm, center wavelength: 365 nm,

Resolution : 0.01 mW/cm2 (1mW/cm2 = 1000 uW/cm2)

Range : 0-1999 mW/cm2 ( milliwatts / cm )

Measurement error : ± 5%

The use of power : 1000 mAh lithium-ion battery

Battery power consumption: about 0.1mA

Battery life: about 500 full charge and discharge times , filled with a normal 30 days , depending on usage .

Main housing material: aluminum, anodized surface treatment

Dimensions: square structure , long- 120x width 78x height 18 mm ( millimeters )

Display: 1.5 inches ( 128 * 64 LCD screen + glass )

Sensitive probe: diameter : 35mm, height : 16.5mm

Probe line : the standard line : 1.5 m extension cord : 2 m

By Aperture : Φ9mm

Sampling time: about 0.5 seconds

Data Logging: 10 groups circulation data

Charging Interface : USB ( standard charging port )

Host weight : 240g

Probe Weight : 80g

Operating temperature : 0 to 85 ℃ ( degrees Celsius )

Withstand temperature : under 120 ℃ ( degrees C ) continuous irradiation conditions less than 20 seconds

Calibration cycle : Since all of the electronic components such as: sensors, usually with an extension of time and aging , to more accurately ensure accuracy and effectiveness , the proposed one-year calibration cycle

Warranty: one year from the date of purchase warranty, man-made damage , or damage caused by objective factors other than

Standard accessories : Host: 1 ; UVA probe: 1 ; charging cable : 1 ; Instructions : 1 ; guarantee card : 1 ; portable box: 1

Optional accessories : UVA, UVB, UVC, UVV four kinds of probes.

Usage:

1 , we must first connect the probe connector plug is inserted into the instrument , such as the state of the instrument is turned on will automatically restart, shutdown state to enter the next step ;

2, according to the far left of the instrument panel, "NO / OFF" key to boot into the system as shown on the display after the brand LOGO and product serial number LCD display is MAX 0.000, CUR 0.000, then you can be tested ;

3, the detection probe toward the UV light source to be detected in the detection value to the level of attention and instrument -independent standard , and on the location of the UV lamp and power on ;

4 , with different positions of the detection probe , the instrument appears on the display corresponding to the light intensity data , as shown , " 100" , depending on the detected light intensity of 100mw/cm2, MAX is the maximum value is automatically recorded as no higher value will remain ;

5 , the instrument screen will display two sets of data , the maximum value "MAX", the current value of the "CUR", if the operator wants to record the current value of the light intensity of a certain point , just click the "HOLD" button to lock the value of the instrument will light intensity values on the display above ;

6 , according to "CHANGE" key to re- test the next set of data , a total circulation of 10 sets of data record-keeping ,

7 , smart shutdown function : 10 seconds without a key or non- test information automatically turn the backlight ; no signal state 5 minutes without operating keys automatically shut down ; signaled 10 minutes without operating keys automatically shut down , put it in its after shutdown package , for safekeeping.