BIKESU UV-int140 UV-integrator

bikesu UV-INT140 UV-integrator is a high-quality, high-precision UV-integrator. Used to measure the energy value of the irradiation of different light sources under certain conditions, the UV production process is extremely important in the curing quality monitoring instruments, and an essential tool for good control and to achieve consistency of product curing quality.
UV-integrator to measure the spectral range 250-410nm (nanometers), the best sensing UV wavelength of 365nm (nanometers).
Every time you use, set the switch of the instrument adjusted to open the status is "ON" position displayed on the LCD display reading of "0" mj/cm2 (mJ / square cm), if not the particularity of purpose, each before the first measurement, the zero reading.
If your process is special needs, can also be measured repeatedly, every measurement readings, does not require zero processing, then the last displayed in the instrument readings will be the cumulative value of the repeated measurements. When the measurement is complete, switch to "OFF" position to switch off the instrument, correct operation will extend the battery usage time of the instrument.

■ Technical Data:
Spectral range: UV 250-410nm (nanometers)
Intensity range: 0-5,00 mW/cm2. (Milliwatts / square cm)
Range: 0-999,999 mJ/cm2 and (mJ / square cm)
Using the power supply: Lithium battery 3.6V
Power consumption: about 10,000 hours
Battery life: one year under normal operating conditions
Dimensions: structure of the disc diameter of 140mm (mm), height 13mm (mm)
Weight: 450g (grams)
Ambient temperature: 0-70 ° C (degrees Celsius)
Withstand temperature: 110 ° C (degrees Celsius) under the conditions of continuous irradiation does not exceed 10s (seconds)
Calibration cycle: the proposed calibration period of one year.
Warranty: warranty from date of purchase within one year, except for damage caused by human factors.