BIKESU UV-integrator150 UV-integrator

the product description:
UV energy meter UV-int150 standard is a high-quality UV energy meter. This instrument is a German imported parts production. UV energy meter is an instrument for measuring the UV curing device of UV energy, the back of the main sensor of the measuring instrument measuring instrument measuring range of 250 to 410 nm, measurement can be directly displayed a positive display in the energy meter read (unit: mJ / square cm), the energy of power 3.6-volt lithium battery, the battery due to the use of a special energy saving circuit, the battery lasts about 10,000 hours.
Second, the product parameters:
◆ Test range :0-5000mw / cm2
◆ show six character numeric LCD :0-999999mj / cm2
◆ diameter: 90mm: 12mm
◆ spectral measurement range of 250 to -410 nm
◆ heating the maximum temperature: 70 ℃
◆ Switch: ON / OFF file
◆ Weight: about 150 g
◆ Power supply: 3.6 V lithium battery

Third, the installation / operation:
    ◆ Open the ON switch, the LCD (display) is displayed as zero.
    ◆ UV energy meter placed near the UV lamp light source, as far as possible its the back of the alignment light source (due to the energy of the energy of receptors on the back), exposure time is appropriate to extend.
    ◆ on the display until the energy meter measurements, such as 800 mJ / square cm. (800mj/cm2)
    ◆ turn off the energy meter switch (OFF), or the display value to zero.
    ◆ Note: Make sure to use the temperature of the factory in less than 70 ℃.

Fourth, note:

Do not direct vision or direct vision through the refraction / reflection UV lamp to ensure that any parts of the body are not subject to direct UV light. The UV energy meter can withstand higher temperatures, more than 10 seconds on the conveyor, temperature 110 ° C.